Search
Alan Stevenson, AIA, LEED® AP


I am an architect contributing to projects in the New York office of HOK.

Everything posted on this blog is my personal opinion and does not necessarily represent the views of any other person or party.

RSS FEED
« Rainscreen Facades | Main | Photosynths for Construction »
Sunday
Aug152010

Parapet Detail

In classical forms of architecture, parapets served both decorative purposes and provided the defense function of diverting projectiles. Parapets in modern buildings are often simply vertical extensions of the exterior wall.  They capture the edge of a flat roofing system.  Also, they provide the appearance of a flat roof from below, regardless of the slight slope of the roof surface.  If constructed from fire resistant material, parapet walls can provide protection from the spread of fire from one building to the next.  This sketch depicts a masonry parapet and a few typical components used to complete the assembly.

Reader Comments (1)

Wall Facade Design-- Smartfix ACP Fixing solution, The Future of Facade fixing techonlogy

The wall facade in the front of the building is one of the most important design features. It introduces visitors and passersby to the building and sets the tone for the interior design of the building. The wall facade can be designed using a number of different elements and materials. Building and storefront designers put a lot of time and effort into carefully planning out the wall facade of building to make sure that it makes a statement. When designing the buildings facade, there are many available options to choose from.

When it comes to designing a building, whether it is a small business storefront or a multi-level condominium complex, the facade of the building is very important structurally and visually. Building architects will devote a significant amount of time making sure that there are attractive design elements that give the building front a certain aesthetic quality. The architects may attempt to configure their designs in order to coincide with existing architectural elements that are commonplace to a specific area. Or they may attempt to have their design stand out from surrounding buildings and create something unique and independent. Regardless of architectural design intent, the wall facade of a building tells a story all on its own.

Guangzhou Aloya Renoxbell Aluminum Co.,Ltd provide you turnkey solution for Wall Facade, we use Smartfix Fixing system for our clients to fulfill amazing wall facade.

The CSIRO have referred to the smartfix system as“sharp and clean with pleasing architectural features which is
both waterproof and self draining”

Smartfix advantages

* Awarded by the international Red Dot committee in Germany for excellence in design solutions
* No exposed face sealants used for vertical and horizontal joints
* Low Maintenance as a result of no exposed sealants
* Concealed fixed, Mechanically fixed – full perimeter of panel
* Perfect joint uniformity from end to end and top to bottom
* Superior structural rating
* Approved and tested for use as a waterproof facade system and self draining system - refer CSIRO Smartfix test DTF750 results, passed to AS4284
* Up to 20% quicker to install over traditional cassette jointing system
* Once panels are installed scaffolding can be immediately removed.
* All Smartfix fixing components can be supplied in unlimited colours and finishes; and are fully recyclable
* Fully compatible when interfacing with all types of Aluminium window sections
* Cosmetically and structurally more advanced for all Aluminium Composite Panel installations
* 25% thicker panel used with Smartfix (5mm)

Past and current issues associated with
traditional fix Aluminium Composite panel systems
Heavy sealants used in tape and cassette fix systems:

* Trap dust and dirt
* Harbor Bacteria
* Bleed into edging of panels due to petroleum content commonly found in facade sealants (staining panels)
* Short life span
* Unsightly from day of installation
* Uneven and inconsistent joint lines
* Inconsistent straightness from substructure
* Reliant on heavy face sealants for weather seal
* Creeping joint tolerances can result in uneven jointing and varying joint widths
* Increased labour to install tape and Cassette fix systems and caulking with heavy sealants.

"Smartfix is a concealed and mechanically fixed facade system, which comes in unlimited colours, and guarantees panel uniformity from panel to panel for 20 years from installation. Cosmetically and structurally, Smartfix has set the benchmark in Aluminium Composite Panel installations." We recommend on all commercial buildings where ACP’s will be used!

There are a number of advantages to using Smartfix to help you in your building wall facade design and in other stages of your project design.

For more information, pls contact me freely!
My email address: Peterlee2046@126.com
Skype: petersonlee1
MSN: petersonlee20462046@hotmail.com

December 13, 2010 | Unregistered CommenterPeter

PostPost a New Comment

Enter your information below to add a new comment.

My response is on my own website »
Author Email (optional):
Author URL (optional):
Post:
 
Some HTML allowed: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <code> <em> <i> <strike> <strong>